User Guide

Charging VZ-X

Please charge VZ-X before using to make sure you have sufficient battery power for your session. The steps for charging VZ-X are as

below :

Connect the included Micro-USB cable to the Micro-USB port of VZ-X.

Next, connect the other end of the cable to a 5V/2A USB power adapter (not included).

Then, plug the adapter to an outlet for charging.

Note:

(1) It is not possible to charge VZ-X via the USB ports of a computer, TV or projector as they do not provide

sufficient power output for charging VZ-X.

(2) You may use VZ-X when it is plugged into a power outlet regardless of its remaining battery power.

5V/2A USB power adapter

(not included)

When VZ-X is charging, its Battery Status Indicators will flash Green indicating that it is

9hrs

receiving a charge. All of its indicators will light up Green when VZ-X is fully recharged.

Note:

(1) It takes approximately 9 hours to fully recharge VZ-X on an empty battery assuming that it is

powered off during recharging. It will take significantly longer to fully recharge if it is in use.

(2) VZ-X’s battery can last for at least 9 hours on a full charge.