User Manual

9
B. Use an upside-down ceiling mount
The Sensor Cam can be mounted upside-down onto the ceiling or
ceiling-mounted projector. To do so:
1. Align the hole on the base of the Sensor Cam with the circular peg of
the ceiling mount and push the Sensor Cam in. You will hear a slight
click when the Sensor Cam has settled into position.
2. Before affixing the mount to the ceiling, hold the Sensor Cam in an
area just below (by a few inches) where you intend to mount the
projector. Run the Sensor Cam position Diagnosis (see Page 15) with
the Sensor Cam in this position to ensure maximum accuracy.