User Manual

Tap the contact-sensitive Pen tip

onto the screen surface.

Press the green button.

There are two ways to use the Interactive Pen. Firstly, it can be used as

a mouse with any mouse-based software application. Secondly, when

paired with IPEVO Annotator, it can be used just like your regular

whiteboard marker (see Page 18~21).

Please do the following every time before you start using the

Interactive Pen:

1. Plug the Wireless Receiver into your computer’s USB port.

2. Turn on the Sensor Cam by pressing the Sensor Power Button located

on the Pen. Make sure the Pen is pointing at the Sensor Cam while

doing so.

3. Check that the LED indicator of the Sensor Cam shows a solid Green.

The Interactive Pen can behave like a mouse, transforming any surface

into a touchscreen when you use it with a mouse-based application. It

can be use to:

A. Control cursor movement

Control the computer’s cursor movement by using the Interactive Pen

to intuitively perform the actions you’d normally use your mouse to

perform. The mouse cursor will follow the Pen’s movement in real

time.

B. Perform left click

Tap the contact-sensitive Pen tip onto the screen surface, or press the

IPEVO button once to perform a left click.

Using IW2 Interactive Pen

Using the Interactive Pen as a Mouse