User Manual

2. Positioning the Sensor Cam

Proper position of the Sensor Cam is important for optimum operation.

Follow these guidelines to place the Sensor Cam:

• For most projectors, a good position for the Sensor Cam will be the

same location as the projector. One exception to this is if you are us-

ing a short-throw projector. In that case, you will need to place the

Sensor Cam further away from the screen than the projector.

• Minimal distance from your screen depends on screen size. Place the

Sensor Cam according to the recommended distances in the chart

below:

Screen Size 60” 70” 80” 100”

Minimal

Distance

8 ft

(243 cm)

9 ft

(275 cm)

10 ft

(305 cm)

11 ft

(335 cm)

• The Sensor Cam should face directly at the projection screen. De-

pending on your screen’s height, you may have to adjust the Sensor

Cam’s lens to face upwards or downwards. Adjust the hinged metal

base to easily perform any such adjustments.

• The Sensor Cam is best placed opposite the center of the screen at a

straight-on angle. However, a straight-on angle is not required for

acceptable operation, and the Sensor Cam may be placed at another

angle if necessary. Please refer to the diagram on the

following page for placement zones according to accuracy quality: