SDS

ARTICLE INFORMATION SHEET
The product listed below is an “article,” and therefore is not subject to the Occupational Safety
and Health Administration’s (OSHA) Hazard Communication Standard, 29 CFR
1910.1200(b)(6)(v), and 1910.1200(c) which defines an “Article,” as a manufactured item other
than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii)
which has end use function(s) dependent in whole or in part upon its shape or design during end
use; and (iii) which under normal conditions of use does not release more than very small
quantities, e.g. , minute or trace amounts of a hazardous chemical, and does not pose a physical
hazard or health risk to employees. For this product, an article, a Safety Data Sheet (SDS) has not
been prepared, as none is required under OSHA. However, this Article Information Sheet
document was prepared as a courtesy for our customers.
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name:
Foil Tapes: AFL301, AFL301L, ALF150L, ALF161A,
ALF175L, ALF200, ALF200L, ALF201L, ALF202L,
ALF300, ALF300L, ALF301, ALF301L, ALF Mastic,
ASJ1, FSK1
Company:
Intertape Polymer Group
100 Paramount Drive, Suite 300
Sarasota, Florida 34232
Product Use:
HVAC, industrial, and other applications
Issue Date:
July 25, 2018
Emergency phone number:
[phone]
2. HAZARD IDENTIFICATION
This product is exempt from OSHA’s Hazard Communication Standard (29 CFR 1910.1200).
However, this product should not present a health or safety hazard under recommended or
normal use of the product.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
C.A.S. Number
Weight (%) Percentage
Pressure Sensitive Tape
IPG Trade Secret*
100
*chemical identities and percentage formulations are withheld as IPG proprietary information
page 1 of 5