User's Manual

IPICO Spider User Manual V1.0 draft 20071123 RWD .doc 12/12/2007 Page 13

4.1 Power input side

The PSU can cope with alternative voltage from 87Vac to 264Vac, 50-60Hz.

Figure 11: Mains input & switch

4.2 Power output side

The PSU provides 3 different voltages:

• +5V @1A

• +12V @1A

• Adjustable voltage for TX drive: +6V, +8V, +10V, +12V or +13.8V (+12V by default) @ 10A

The figure below shows the DC outputs side of the PSU.

Figure 12: DC voltage outputs

Output voltages connector:

The connector is a Neutrik NL4FX.

Voltage indicators:

These indicators correspond to each voltages used in the reader. When the reader is turned on, all

should be lit.

Adjustable voltage settings:

The TX drive voltage is adjustable by dipswitches. The picture below shows the location of the dipswitches.

On/Off switch

Mains input

connector

Output

voltages

Voltage indicators