User's Manual

IPICO Spider User Manual V1.0 draft 20071123 RWD .doc 12/12/2007 Page 16
After you setup correctly the connection, whenever a tag will be read, data will be sent by the reader to the
COM port.
5.3 WIFI version
5.4 Change the IP address (Ethernet or WIFI)
If you want to change the IP address, type in your internet browser address bar the current IP address of the
reader. A username and password will be asked.
• username: admin
• password: Don’t fill anything in the password field
Then a web page will open. You can type the new IP address and click on the “Save” button.
5.5 Reader data protocol
The following lines correspond to 2 tags that have been detected. The first tag detected has the ID
058000ab8684 and the second tag detected has the ID 058000abb494. The first tag has been read 6 times,
and the second tag has been read 4 times. There is one line outputted from the reader each time the tag is
read.
aa01058000ab8684000107060411580861bb
aa01058000ab8684000107060411580917bd
aa01058000ab8684000107060411580922b9
aa01058000ab868400010706041158094cec
aa01058000ab8684000107060411580958c2
aa01058000ab8684000107060411580963be
aa01058000abb49400010706041158131b0c
aa01058000abb494000107060411581320db
aa01058000abb49400010706041158132a0c
aa01058000abb494000107060411581353e1
The following table explains the different parts of each line:
Example:
Tag with an ID = 470011223344 is read at 14:05:20.39 on 2006-12-30 the data packet received from the
reader would be aa00470011223344090006123014052027xx\r\n where xx is the calculated LRC.