Setup Manual

V1 mini series server instruction manual
- 8 -
2. Log in to the Server
2.1 Find the server IP
After the server is powered on and connected to the Internet, it starts to start. After the server’s normal
starts to light up, you can find the IP of the server. You can use the “show IP” software to find the server
IP as follows:
(1) Download software: http://www.nano.cn/download/ShowIP.exe
(2) Double-click “show IP” to open the software.
(3) Short press the “IP Report” button on the server for 1 second and release it.
(4) The server IP information is fed back on the PC, as shown below:
Note: The server and PC must be in the same network segment, otherwise the IP information
returned by the server cannot be received.