User's Manual

IPS GROUP, Inc. – M5 Manual (Ver. 1.0)

All information contained herein is considered confidential

Smart Cards

To make a payment with a smart card, follow these steps:

1. Insert the card chip-side up. The meter will display the remaining balance on the

card.

2. Choose amount of time using blue buttons (+ for more time, - for less time).

3. Press ‘OK’ once desired time is displayed on the screen or ‘Cancel’ to void the

transaction. Follow the instructions on the screen and do not remove the smart

card until instructed to do so. The screen will display the amount deducted from

the user’s smart card as well as the remaining balance.

4. Metering begins when ‘OK’ is pressed.

If a card is left inside the meter, the meter will alert the motorist with a series of beeps. If

it is not removed, the meter will report a card jam.