On-Premise Laundry Planning Handbook CHM2097N IHC Washer-Extractors Refer to Installation manual for full instructions.
Table of Contents Washer-Extractors ................................................................... Introduction............................................................................ Model Identification - IHC Washer-Extractors.................. Specifications and Dimensions - Model IHC012 ................... Specifications and Dimensions - Model IHC018 ................... Specifications and Dimensions - Model IHC025 ................... Specifications and Dimensions - Model IHC030 ...............
Washer-Extractors Introduction Model Identification - IHC Washer-Extractors CHM2097N Figure 1 5-08-52 IHC012 IHC025 IHC018 IHC030 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT IHC035 2
Washer-Extractors Specifications and Dimensions - Model IHC012 Capacity (dry weight) Ratio (kg/l) 1:11 11.02 lb. (5 kg) 1:10 12.13 lb. (5.5 kg) 1:9 13.45 lb. (6.1 kg) Cylinder Cylinder diameter, in. (mm) 20.87 (530) Cylinder depth, in. (mm) 9.84 (250) Cylinder volume, ft.3 (l) 1.94 (55) Cabinet Overall height, in. (mm) 40.87 (1038) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 22.64 (575) Front Loading Door opening size, in. (mm) 11.
Washer-Extractors Machine Dimensions - Model IHC012 39.8 in. (1011 mm) 10.98 in. (279 mm) 40.87 in. (1038 mm) 6.4 in. (163 mm) 1.3 in. (33 mm) 1.3 in. (33 mm) 2.56 in. (65 mm) 25.98 in. (660 mm) 1 5.94 in. (151 mm) 2.95 in. (75 mm) 1.18 in. (30 mm) 1.18 in. (30 mm) 19.09 in. (485 mm) 2.56 in. (65 mm) 20.87 in. (530 mm) 8.9 in. (226 mm) CHM2200N CHM2100N 2 22.24 in. (565 mm) 2.72 in. (69 mm) 3 24.49 in. (622 mm) CHM2201N CHM220 4 5 4.3 in. (109 mm) 27.41 in. (696.2 mm) 7 2.76 in.
Washer-Extractors Mounting Bolt Hole Locations - Model IHC012 1.18 in. (30 mm) 21.46 in. (545 mm) 19.09 in. (485 mm) ø0.71 in. (ø18 mm) 1.18 in. (30 mm) 2.56 in. (65 mm) 20.87 in. (530 mm) 2.56 in. (65 mm) 25.98 in.
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IHC012 Boiler Fed/Steam Heat 3 3+PE 3 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 7 15 16 14/2.5 Q 200-240 50/60 3 3+PE 7 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 7 15 16 14/2.
Washer-Extractors Specifications and Dimensions - Model IHC018 Capacity (dry weight) Ratio (kg/l) 1:11 15.21 lb. (6.9 kg) 1:10 16.76 lb. (7.6 kg) 1:9 18.52 lb. (8.4 kg) Cylinder Cylinder diameter, in. (mm) 20.87 (530) Cylinder depth, in. (mm) 13.58 (345) Cylinder volume, ft.3 (l) 2.68 (76) Cabinet Overall height, in. (mm) 40.87 (1038) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 29.09 (739) Front Loading Door opening size, in. (mm) 11.
Washer-Extractors Machine Dimensions - Model IHC018 10.98 in. (279 mm) 39.8 in. (1011 mm) 40.87 in. (1038 mm) 8.66 in. (220 mm) 1.3 in. (33 mm) 2.56 in. (65 mm) 20.87 in. (530 mm) 1.3 in. (33 mm) 2.56 in. (65 mm) 25.98 in. (660 mm) 1 23.23 in. (590 mm) CHM2204N 5.94 in. (151 mm) 2.95 in. (75 mm) CHM2204N 8.9 in. (226 mm) 2.72 in. (69 mm) 28.62 in. (727 mm) 26.38 in. (670 mm) CHM2205N 2 3 4 CHM2 5 10 6 2.76 in. (70 mm) 27.41 in. (696.2 mm) 29.41 in. (747 mm) 4.3 in. (109 mm) 19.
Washer-Extractors Mounting Bolt Hole Locations - Model IHC018 1.18 in. (30 mm) 25.59 in. (650 mm) 23.23 in. (590 mm) ø0.71 in. (ø18 mm) 1.18 in. (30 mm) 2.56 in. (65 mm) 20.87 in. (530 mm) 2.56 in. (65 mm) 25.98 in.
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IHC018 Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
Washer-Extractors Specifications and Dimensions - Model IHC025 Capacity (dry weight) Ratio (kg/l) 1:11 18.96 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.15 lb. (10.5 kg) Cylinder Cylinder diameter, in. (mm) 20.87 (530) Cylinder depth, in. (mm) 17.32 (440) Cylinder volume, ft.3 (l) 3.35 (95) Cabinet Overall height, in. (mm) 40.87 (1038) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 33.03 (839) Front Loading Door opening size, in. (mm) 11.
Washer-Extractors Machine Dimensions - Model IHC025 10.98 in. (279 mm) 40.87 in. (1038 mm) 39.8 in. (1011 mm) 8.66 in. (220 mm) 1.3 in. (33 mm) 20.87 in. (530 mm) 2.56 in. (65 mm) 25.98 in. (660 mm) 5.94 in. (151 mm) 2.56 in. (65 mm) 8.9 in. (226 mm) 27.16 in. (690 mm) CHM2204N 2.72 in. (69 mm) 2 3 1.18 in. (30 mm) 1.18 in. (30 mm) CHM2204N 2.95 in. (75 mm) 1 1.3 in. (33 mm) 32.56 in. (827 mm) 30.31 in. (770 mm) 4 CHM2209N CHM 5 10 6 7 27.41 in. (696.2 mm) 29.41 in.
Washer-Extractors Mounting Bolt Hole Locations - Model IHC025 1.18 in. (30 mm) 29.53 in. (750 mm) 27.17 in. (690 mm) ø0.71 in. (ø18 mm) 1.18 in. (30 mm) 2.56 in. (65 mm) 20.87 in. (530 mm) 2.56 in. (65 mm) 25.98 in.
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IHC025 Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
Washer-Extractors Specifications and Dimensions - Model IHC030 Capacity (dry weight) Ratio (kg/l) 1:11 26.46 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.97 lb. (14.5 kg) Cylinder Cylinder diameter, in. (mm) 25.59 (650) Cylinder depth, in. (mm) 15.75 (400) Cylinder volume, ft.3 (l) 4.66 (132) Cabinet Overall height, in. (mm) 47.32 (1202) Overall width, in. (mm) 30.71 (780) Overall depth, in. (mm) 33.15 (842) Front Loading Door opening size, in. (mm) 11.
Washer-Extractors Machine Dimensions - Model IHC030 8.66 in. (220 mm) 46.3 in. (1176 mm) 14.78 in. (376 mm) 47.32 in. (1202 mm) 3.47 in. (88 mm) 1.34 in. (34 mm) 2.6 in. (66 mm) 1.34 in. (34 mm) 25.51 in. (648 mm) 10.49 in. (267 mm) 7.93 in. (202 mm) 4.13 in. (105 mm) 1 1.44 in. (36.5 mm) 26.18 in. (665 mm) 3.23 in. CHM2212N (82 mm) 32.13 in. (816 mm) 2.6 in. (66 mm) 30.71 in. (780 mm) CHM2212N 13.05 in. (332 mm) 1.44 in. (36.5 mm) CHM2213N CHM2213N 2 3 4 5 10 8 2.76 in. (70 mm) 25.
Washer-Extractors Mounting Bolt Hole Locations - Model IHC030 1.44 in. (36.5 mm) 29.06 in. (738 mm) 26.18 in. (665 mm) ø0.71 in. (ø18 mm) 1.44 in. (36.5 mm) 2.58 in. (66 mm) 25.51 in. (648 mm) 2.62 in. (66 mm) 30.71 in.
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IHC030 Boiler Fed/Steam Heat 3 3+PE 6 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 18 20 20 12/4.0 Q 200-240 50/60 3 3+PE 18 20 20 12/4.0 X 200-240 50/60 1/3 2/3+PE 18 20 20 12/4.
Washer-Extractors Specifications and Dimensions - Model IHC035 Capacity (dry weight) Ratio (kg/l) 1:11 33.07 lb. (15 kg) 1:10 36.38 lb. (16.5 kg) 1:9 40.34 lb. (18.3 kg) Cylinder Cylinder diameter, in. (mm) 25.59 (650) Cylinder depth, in. (mm) 19.69 (500) Cylinder volume, ft.3 (l) 5.83 (165) Cabinet Overall height, in. (mm) 47.32 (1202) Overall width, in. (mm) 30.71 (780) Overall depth, in. (mm) 37.09 (942) Front Loading Door opening size, in. (mm) 11.
Washer-Extractors Machine Dimensions - Model IHC035 8.66 in. (220 mm) 46.3 in. (1176 mm) 14.78 in. (376 mm) 47.32 in. (1202 mm) 3.47 in. (88 mm) 1.34 in. (34 mm) 1.34 in. (34 mm) 2.6 in. (66 mm) 25.51 in. (648 mm) 2.6 in. (66 mm) 30.71 in. (780 mm) 1.44 in. (36.5 mm) CHM2216N CHM2216N 36.06 in. (916 mm) CHM2217N CHM2217 2 7.93 in. (202 mm) 1.44 in. (36.5 mm) 33.86 in. (860 mm) 3.23 in. (82 mm) 13.05 in. (332 mm) 10.49 in. (267 mm) 30.12 in. (765 mm) 3 4.13 in. (105 mm) 4 5 1 6 1.
Washer-Extractors Mounting Bolt Hole Locations - Model IHC035 1.44 in. (36.5 mm) 32.99 in. (838 mm) 30.12 in. (765 mm) ø0.71 in. (ø18 mm) 1.44 in. (36.5 mm) 2.58 in. (66 mm) 25.51 in. (648 mm) 2.62 in. (66 mm) 30.71 in.
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IHC035 Boiler Fed/Steam Heat 3 3+PE 6 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 18 20 20 12/4.0 Q 200-240 50/60 3 3+PE 18 20 20 12/4.0 X 200-240 50/60 1/3 2/3+PE 18 20 20 12/4.
Washer-Extractors Installation - IHC Models CAUTION Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked. SW020 Surface The machine must be securely fixed on a flat surface (metal base, concrete or solid ground). The anchoring is to be done on the 6 provided places in the holes on the corner of the base. (See Mounting Bolt Hole Locations).