Spec Sheet

®
A Gorman-Rupp Company
IPT ENGINE DRIVEN HIGH PRESSURE/FIRE PUMPS
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)
For use with nonflammable liquids compatible with pump component materials. Viton
®
and Teflon
®
are registered trademarks of E. I. Dupont.
Model 25FP13HR
Model 25FP23AR
FIRE-9
010203040506070
0
20
40
60
80
100
120
140
160
0
40
80
120
160
200
240
280
320
360
400
04080120 160 200 240 280 320
Capacity
Liquid - Water specific gravity 1.0
A = 25FP13HR, 25FP13ZR
B = 25FP13AR
C = 25FP23AR
0
10
20
30
40
50
60
70
80
90
100
110
120
[m] [ft.]
[U.S. gpm]
Total Head
[m
3
/h]
C
B
A
[psi]
Performance of Engine Driven Fire Pumps
2-1/2˝ Engine Driven High
Pressure/Fire Pumps
• Aluminum Construction with
Replaceable Hard Coat Anodized
Wear Ring
• Viton
®
Mechanical Seal with Silicon
Carbide & Carbon Faces
• 2-1/2˝ NPT Port Sizes
• Exhaust Prime or Hand Prime Depending
on Model
• Prime Assist to 19 Ft.
• Built-in Discharge Check Valve
• Discharge Pressure Gauge Included
• Suction Strainer, Nipples and Heavy Duty
Steel Roll Frame with Battery Tray Included
• Maximum Head up to 165 PSI/ 380’ TDH
• Delivers to 270 GPM
• Available with B&S Vanguard, Honda
Gasoline or Hatz Diesel with 12 Volt DC
Electric Start
• Optional NPT to Fire Hose Thread
Available – See Accessories Page
• Optional Wheel Kit Available
The IPT Engine Driven line of High
Pressure/Fire pumps deliver excellent pressure
and flow for use in many applications including:
fire protection, emergency fire fighting,
washdown and AG/Sprinkler. Portable units
feature metal fuel tanks installed on engine or
frame depending on model. 12 Volt DC electric
start engines with recoil starter from Briggs &
Stratton Vanguard, Honda Gasoline or Hatz
Diesel engines are standard on these pumps.
Vanguard models feature built-in exhaust
prime. Honda and Yanmar models feature a
manual hand prime. These pumps are
equipped with Viton
®
Silicon Carbide/Carbon
seal and Viton
®
O-rings/gaskets.
BY
®
®