Installation Instruction Pull Out Kitchen Faucet Model: 5828 1
*Specify Finish 3 4 5 6 7 8 1 22 9 10 11 12 23 17 18 13 14 15 25 24 19 20 21 16 PART PIÈCE DESCRIPTION DESCRIPTION PART# N ° DE PIECE 1 2 3 Spray head and Hose / Cabezal rociador y manguera Index / Índice Set screw / Tornillo de fijación RP38280* RP10006 RP50002 4 Handle / Llave RP13310* 5 6 7 8 9 Cap / Tapa Screw /Dispensador de jabón Bonnet / Bonete Cartridge & Screw / Cartucho y tornillo Plastic washer / Arandela plástica RP80382* RP50068 RP70336 RP20005 RP64191 10 Metal Washer
Product Dimension Drawing 275.9mm [10.9in] 220.3mm [8.7in] 254.0mm [10.0in] 23° 196.8mm [7.7in] 118.3mm [4.7in] 12° 60.0mm [2.4in] MAX:53.5mm [2.1in] 628.6mm [24.7in] 203.2mm [8.0in] 9/16-27UNS-2B 108.7mm [4.3in] 75.2mm [3.0in] 39.0mm [1.5in] 51.0mm [2.
2a 1 This faucet can be installed as 4 hole installation with the escutcheon or as 2 hole installation with flange. If using flange, begin with step 2a. If using escutcheon, begin with step 3a. Optional Flange Installation Shut off water supplies. Remove old faucet. Place flange on the sink. Proceed to Step 4. Este grifo se puede instalar con cuatro orificios con la placa ornamental o con un dos orificio con un reborde. Si utiliza un reborde, comience con el paso 2a.
3c 4 1 2 3 4 Optional Escutcheon Installation Insert faucet body through the hole in escutcheon. Install the plastic washer (1), and metal washer (2) onto the threaded mounting shank. Thread the nut (3) onto the mounting shank. Lock the nut (3) into position by tightening the screws (4). Do not overtighten. Instalación de la Placa Ornamental Opcional Inserte el cuerpo del grifo en el orificio de la placa ornamental.
9 8 Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with a wrench. Do not overtighten. NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging. IMPORTANT: After installation is completed, turn on the hot and cold water supplies. Check for leaks. Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction.
Cleaning Recommendations Today, modern sanitary and kitchen tapware, showers, accessories, washstands, tubs and consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and product failures and not void Warranty please follow the below guideline. •Only use cleaning material which is explicitly provided for this type of application.
Warranty conditions General LIMITED CONSUMER Warranty is limited to products that are purchased by a consumer in the United States or Canada after November 1, 2015, and installed in either the United States or in Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is non-transferable.