Installation Guide

PAGE 1

Linear Drain

Installation Instructions

GRANITE SINK INSTALLATION GUIDE

2. Hair Strainer

3. Linear Channel

1. (a) Grate Tray

(b) Tile Tray

4. Optional Adapter

5. Lift-Out Key

Square Punch Linear Drain

Tile Insert Linear Drain

PAGE 1
Linear Drain Installation Instructions GRANITE SINK INSTALLATION GUIDE Square Punch Linear Drain a Tile Insert Linear Drain b 1. (a) Grate Tray (b) Tile Tray 2. Hair Strainer 3. Linear Channel PAGE ! 1 4. Optional Adapter 5. Lift-Out Key Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright ©2016, IPT Sink Company Inc. All rights reserved.
PAGE 2
Linear Drain Installation Instructions An exploded view of a typical shower flanged drain assembly is shown on the left for your reference. This assembly can be made from PVC, cast iron or other composite materials. Flexible Sealant IPT Sink Company Linear Channel & Grate or Tile Tray Min.
PAGE 3
Linear Drain Installation Instructions Step 1 - Prepare Shower Pan Pre-slope shower pan and install waterproofing membrane per manufacturer’s instructions. Any waterproofing membrane material or procedure can be used (vinyl, CPE Membrane, Roll/Paint On, Metal Pan, Hot Mop, Surface Sheet Membrane, etc.). Perform a leak test as required. Step 2 - Rough Opening The IPT Sink Company Linear Drain channel width is 3-3/16”.