Installation Guide

Porcelain Vessel Sink

Installation Instructions

Recommended Tools & Materials (Not Included)

□ Tape Measure

□ Safety Glasses

□ Painter’s Tape

□ Level

□ Ear Protecon

□ Pencil (not permanent marker)

□ Shims or Cabinet Fillers

□ Denatured Alcohol

□ Construcon Adhesive

□ Silicone Adhesive Sealant

□ Screws (if needed)

Before You Start

• We recommend that all porcelain sinks be installed by an experienced, professional installer.

• IMPORTANT: We DO NOT oer the cutout template for porcelain sinks. It is recommended that you discuss with your

installer and agree that the nished appearance is the desired eect. We ARE NOT responsible for improper sink or

countertop installaons.

• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure of this step can lead to product damage.

• IPT Sink Company porcelain sinks should only be fastened to a solid surface countertop (i.e. granite, Corian® or Silestone®).

• IPT Sink Company is not responsible for sink or countertop if damaged during installaon. Be sure to inspect the sink

for damage prior to beginning installaon.

• Ceramic edges may be sharp – use cauon when handling.

• Follow all local plumbing and building codes.

• For addional informaon please contact us. PHONE: (678) 445 - 4638.

CBVS5069 CBVS6046CBVS6030 CBVS6002

PAGE 1

PAGE 1
Porcelain Vessel Sink Installation Instructions CBVS5069 CBVS6030 CBVS6046 CBVS6002 Before You Start • We recommend that all porcelain sinks be installed by an experienced, professional installer. • IMPORTANT: We DO NOT offer the cutout template for porcelain sinks. It is recommended that you discuss with your installer and agree that the finished appearance is the desired effect. We ARE NOT responsible for improper sink or countertop installations.
PAGE 2
Porcelain Vessel Sink Installation Instructions BEFORE INSTALL YOUR SINK, PLEASE NOTE: Some vessel sinks incorporate a water overflow hole and others DO NOT. Be sure to check your faucet pop-up drain assembly (NOT INCLUDED) before starting to make sure your drain assembly is compatible with your vessel sink. POP-UP DRAIN WITH OVERFLOW POP-UP DRAIN WITHOUT OVERFLOW 1. Unpack the new sink and check the sink. 2.
PAGE 3
Porcelain Vessel Sink Installation Instructions 5. Apply silicon sealant around the bottom rim of the sink as shown. Backsplash Countertop 6. Install the sink and check for alignment. Apply some caulking around the base of the sink to seal any gap between the sink and the countertop. 7. Allow sealant to set for 30 – 60 minutes. 8. Install the drain (not provided) according to the manufacturer’s installation instructions. Connect trap to drain.