Installation Guide
Porcelain Vessel Sink
Installation Instructions
1. Unpack the new sink and check the sink.
2. Place the sink in desired locaon on countertop and mark drain hole and faucet hole centerline
with a pencil.
NOTE: Minimum clearance distance is required for sink faucet.
3. Let an experienced installer cut the drain hole opening in the countertop.
BEFORE INSTALL YOUR SINK, PLEASE NOTE:
Some vessel sinks incorporate a water overow hole and others DO NOT. Be sure to check your faucet pop-up drain as-
sembly (NOT INCLUDED) before starng to make sure your drain assembly is compable with your vessel sink.
POP-UP DRAIN WITH OVERFLOW POP-UP DRAIN WITHOUT OVERFLOW
4. Place the vessel sink through the opening on the countertop and check for level and t.
Plumber’s puy can be used to level the sink.
Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright ©2020, IPT Sink Company Inc. All rights reserved.
Countertop
*Minimum clearance
is required*
Backsplash
Countertop
*Drain hole opening*
PAGE 2
*Minimum clearance
is required*
Backsplash
Countertop