MSDS

Material Safety Data Sheet Button Type CR Lithium cell
Document Number: NL MSDS - CR2032 Revision:002 Page 2 of 4
Section IV - Fire and Explosion Hazard Data
Flash Point (Method Used) N.A.
Flammable Limits N.A.
LEL N.A.
UEL N.A.
Extinguishing Media N.A.
Special Fire Fighting Procedures N.A.
Unusual Fire and Explosion Hazards
Do not dispose of battery in fire - may explode.
Do not short-circuit battery - may cause burns.
Section V - Reactivity Data
Stability Unstable
Conditions to Avoid Stable
Incompatibility (Materials to Avoid)
Hazardous Decomposition or Byproducts
Hazardous
Polymerization May Occur Conditions to Avoid
Will Not Occur
Section VI - Health Hazard Data
Route(s) of Entry
Inhalation N.A.
Skin N.A.
Ingestion N.A.
Health Hazard (Acute and Chronic) / Toxicological information
In case of electrolyte leakage, skin will be itchy when contaminated with electrolyte.
In contact with electrolyte can cause severe irritation and chemical burns.
Inhalation of electrolyte vapors may cause irritation of the upper respiratory tract and lungs.
Section VII - First Aid Measures
First Aid Procedures
If electrolyte leakage occurs and makes contact with skin, wash with plenty of water immediately.
If electrolyte comes into contact with eyes, wash with copious amounts of water for fifteen (15)
minutes, and contact a physician.
If electrolyte vapors are inhaled, provide fresh air and seek medical attention if respiratory
irritation develops. Ventilate the contaminated area.