Installation Guide

14
Release
button
Charging stand
Charging
Cradle
The Charging Cradle can either be used free-standing by use of the stand, or wall
mounted as described below.
Wall mounting the Charging Cradle
“UP” marking to the
front side.
Mounting
screws
Mounting
plate
Remove the stand by pressing
down the release button located
behind of the charging stand &
pulling the cradle upwards.
1
Remove the mounting plate from
the charging cradle.
2
Mount the mounting plate to the
wall using the screws and pegs
provided. Ensure the UP marking
is on the front side.
3
Hang the Charging Cradle
securely on the mounting plate
and push it down so that it snaps
in place.
4
Be sure to x the cradle rmly to the wall so that it does not become detached
when inserting/removing the Indoor Portable LCD Display unit.