Installation Guide

Replacing the rechargeable battery pack

After a prolonged period of use you may have to replace the battery pack. If the

battery does not recharge completely or does not hold a charge you will need to

replace it. Use a “THB-121” battery for replacement. Follow the procedure below to

replace the battery pack.

Low battery

NOTES:

• Please use the “THB-121” (sold separately).

• Specication: Ni-MH battery 3.6V 750Ah.

Recycling your old battery pack

• An Ni-MH battery is supplied for use in this product.

• Ni-MH batteries are a precious recyclable resource.

• At the end of it’s life, please tape up the used battery pack or place it into a plastic

bag, then put it into a rechargeable battery recycling box. See your local authority

for information regards the location of such recycling facilities.

• Observe caution when handling the battery.

• Don’t let the battery pack short-circuit - it can cause a re.

• Please don’t peel off the outer package (coating and tube etc.).

• Don’t disassemble the battery pack.

Ni-MH

1) Remove the battery cover.

2) Unplug and remove the old battery pack. (Follow the

instructions below for recycling of the old battery).

3) Plug in the new battery pack and position the wires so that

they do not obstruct the battery cover.

4) Replace the battery cover.

5) Place the LCD Monitor in the charging cradle and charge for

at least 6 hours.