Installation Guide

9
2) Camera position & Field of View (FOV)
The Camera Door Unit can be mounted in a variety of locations. Review the
information below before installation. It is suggested that you experiment with
different mounting locations by holding the camera in position, pressing the doorbell
pushbutton then checking the image on the LCD monitor.
The diagrams below show an example camera position to view a visitor 500mm
from the camera.
• Camera tilt angle = 0 Deg. (this is the default setting).
• Camera mounting height approx. 1500mm
SIDE VIEW
1500mm
1290mm
420mm
46 Deg.
500mm
1710mm
SHOOTING AREA
TOP VIEW
SHOOTING AREA
500mm
560mm
59 Deg.
The Camera Door Unit can be mounted in a lower position or on the left or right
side. The target shooting area can be adjusted as shown below.
• Camera tilt angle = 15 Deg. (upward).
• Lower mounting height approx. 1100mm
• Camera pan angle = 15 Deg. (to the right).
• Camera mounted to left side
1100mm
1030mm
420mm
46 Deg.
500mm
1710mm
SIDE VIEW
500mm
59 Deg.
620mm
TOP VIEW