Use and Care Manual
4.4.10 Language Setting
The Language Menu allows you to change the IQAir system’s display language.
The languages from which you can choose will depend on the model and the
country of purchase.
1. To reach the Language Menu from the main display window, press the Menu
key nine times. The current language is displayed.
2. To change the display language, press and hold the Enter key until the
cursor starts to ash.
3. Use the p key to scroll through the display language options.
4. Press the Enter key to save the desired display language and to exit the enter
mode.
19
Chapter 4 – Using the Control Panel
4.4.9 Changing the Airflow Units
1. You can reach the Airflow Units Menu by pressing the Menu key eight times.
2. You can change the air volume units which are displayed from cubic feet
per minute (cfm) to cubic meters per hour (m
3
/h), or vice versa, by pressing
the Enter key for three seconds either when the unit is switched on or in
standby mode.
3. When the rst character of the airow units starts to ash, press the p key
once to change the units.
4. Press the Enter key to conrm the air volume unit change. Until modied
again, the airow rate will now be displayed in the newly selected units.
Note: The air delivery (airow units) displayed in this manual are examples
only and will vary according to model.