Installation Manual

7
Setup and Configuration
The next few pages show how to install and configure the IQAir AirVisual Outdoor. First
power the device with one of the two power options. Power can be supplied using the
provided PoE injector (PoE - Power over Ethernet) and supplied Ethernet cable or via
optional USB adapter and USB cable.
Connect the device to the internet with one of the three network options. The IQAir AirVisual
Outdoor is equipped with two built-in connection types, Wi-Fi and Ethernet. A USB 4G
modem is optional.
Power and network options
The IQAir AirVisual Outdoor supports multiple power and network options, the figure below
shows how to power the device and connect it to the internet.
Wi-Fi
USB 4G modem
Wi-Fi
Ethernet
USB 4G modem
USB
PoE
No
Ethernet
Active
Ethernet
No
Ethernet