Datasheet

ManualsBrandsIQinVision ManualsSecurity CamerasIQA32WE-A3

Architectural and Engineering Specification

IQA32WI, IQA32WE, IQA32WX Page 1 of 14 Revision: (07302013)

IQeye Alliance-pro Series, IQA32WI, IQA32WE, IQA32WX

H.264, HD1080p, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated

Autofocus or Varifocal Lens

PART 2 – PRODUCTS

2.1 MANUFACTURER

A. IQinVision

33122 Valle Road

San Juan Capistrano, CA 92675

Phone +1.949.369.8100

Fax +1.949.369.8105

2.2 DESCRIPTION

The product specified shall be an all-in-one vandal/tamper resistant HD1080p resolution color

dome camera designed for indoor/outdoor applications providing multiple H.264 (MPEG4, Part

10) and simultaneous MJPEG streams that can be individually configured. The dome camera

was designed to provide 30fps at maximum resolution with audio, and shall conform to the

ONVIF and PSIA standards.

The camera uses a Wide Dynamic Range (WDR) sensor for enhanced image dynamic range and

DTS (Direct-To-Storage) recording. The camera offers Day/Night functionality with high

sensitivity for use in low light indoor/outdoor applications, and is prepackaged with an

autofocus or varifocal IR corrected lens to allow zoom and focus adjustment. The dome camera

is constructed of cast-aluminum housing with polycarbonate dome bubble and auto tracking

inner liner. The dome camera was designed to protect against water and dust to IP66 / NEMA 4

standards. Requiring low power the dome camera is PoE (IEEE 802.3af) compliant, and can be

powered from 12-24VDC or 24VAC.

2.3 GENERAL REQUIREMENTS

A. The IP dome camera shall be a high impact aluminum, vandal resistant, Day/Night color dome

camera with a progressive scan CMOS sensor.

B. The IP dome camera shall utilize a CMOS sensor that is 1/3-inch with a dichroic infrared mirror

capable of producing HD1080p resolution.

C. The IP dome camera shall have no less than 1920(H) x 1080(V) pixels.

Summary of content (14 pages)

PAGE 1
Architectural and Engineering Specification IQeye Alliance-pro Series, IQA32WI, IQA32WE, IQA32WX H.264, HD1080p, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated Autofocus or Varifocal Lens PART 2 – PRODUCTS 2.1 MANUFACTURER A. IQinVision 33122 Valle Road San Juan Capistrano, CA 92675 Phone +1.949.369.8100 Fax +1.949.369.8105 2.
PAGE 2
Architectural and Engineering Specification D. The camera shall be H.264 (MPEG 4, Part 10) compliant. E. The IP dome camera shall provide dual-codec functionality for simultaneous H.264 (MPEG 4, Part 10) and MJPEG video streaming. F. The IP dome camera shall use Main Profile (MP) for mainstream consumer broadcast and storage applications. G. The IP dome camera H.264 encoded video stream shall support full real time video frame rate of 30fps at a maximum resolution of HD1080p (1920 x 1080). H.
PAGE 3
Architectural and Engineering Specification R. The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant for indoor/outdoor applications. S. The IP camera shall offer an optional integrated 3 – 8mm autofocus megapixel lens (A3) with F1.3, and 1 / 2.7” optical format. T. The IP camera shall offer an optional integrated 9 – 22mm autofocus megapixel lens (A2) with F1.5, and 1 / 2.7” optical format. U.
PAGE 4
Architectural and Engineering Specification EE. The IP dome camera shall require less than 0.05 lux (0.005 fc) to produce a monochrome image when in night mode. FF. The IP dome camera shall be sensitive from 800nm to 940nm IR illumination. GG. The IP dome camera shall have a feature (Lightgrabber™II) that enhances camera sensitivity by increasing the integration time of the CMOS sensor. HH.
PAGE 5
Architectural and Engineering Specification SS. The IP dome camera shall support on camera storage of time lapse and event recording using micro SD Class 6+ media or higher. TT. The IP dome camera shall have an event handler allowing the camera to send an image or video clip to on-camera storage, FTP site, email address, and or network attached storage when receiving an internally or externally generated event. UU. The IP dome camera shall support the following licensed On-Camera IQapps. 1.
PAGE 6
Architectural and Engineering Specification F. The IP dome camera shall have RTSP (Real Time Streaming Protocol) support for compatibility with media players such as VLC Player, Apple QuickTime, Windows Media Player, and Core Player. G. The IP dome camera shall deliver HD1080p quality video at a frame rate of 30fps via TCP/IP over CAT5 or CAT6 cable. H. The IP dome camera shall not require unique or proprietary client software for viewing or controlling the camera. I.
PAGE 7
Architectural and Engineering Specification 2. Monochrome: Less than 0.05 lux (0.005 fc) with an F1.4 lens E. IR Range (nm): 800 to 940 F. Dynamic Range: 70dB G. Exposure: User configurable H. White Balance: AWB (Automatic) & User programmable I. Backlight Compensation: Auto J. Saturation: User configurable K. Contrast: User configurable L. Brightness: User configurable M. Sharpness: Four levels, User configurable N. Gain Control: AGC (Automatic) O. Motion Detection: Four windows, User configurable P.
PAGE 8
Architectural and Engineering Specification U. Camera Name: 16-characters 2.7 IP VIDEO A. Video Compression Standards: 1. H.264 (MPEG 4, Part 10) 2. MJPEG B. H.264 Profile: Main Profile C. Network Streams: 1. Single H.264 or MJPEG stream with configurable frame rate, resolution, bit rate, and quality. 2. Three simultaneous H.264 streams with individually configurable frame rate, resolution, and bit rate. 3. Three simultaneous MJPEG streams with configurable frame rate, resolution, and quality. 4.
PAGE 9
Architectural and Engineering Specification A. Autofocus Lens (A2) option: 1. Lens Mount: ɸ14 2. Lens Format: 1 / 2.7” 3. 9 – 22mm 4. F1.5 5. IR-corrected 6. Remote controlled zoom 7. Auto & remote controlled focus 8. Fixed iris B. Autofocus Lens (A3) option: 1. Lens Mount: ɸ14 2. Lens Format: 1 / 2.7” 3. 3 – 8mm 4. F1.5 5. IR-corrected 6. Remote controlled zoom 7. Auto & remote controlled focus 8. Fixed iris C. Varifocal Lens (B5) option: 1. Lens Mount: M14 2. Lens Format: 1/3” 3. 3-13mm, 4. F1.4 5.
PAGE 10
Architectural and Engineering Specification D. The IP dome camera shall have the ability to enable or disable the external microphone / line level audio input. E. The IP dome camera shall have an audio output for connecting amplified external speakers on a push-in terminal block. F. The IP dome camera shall have the ability to enable or disable the audio output. G. The IP dome camera shall have adjustable gain levels for the audio output. H.
PAGE 11
Architectural and Engineering Specification 2.12 CONNECTORS A. Network Interface: 1. RJ45 Ethernet connector (IEEE 802.3af PoE compliant) 2. 10Base-T/100Base-TX B. Audio: 1. External Microphone / Line input: i. 2-pin push-in terminal block ii. Wire range: 20-26 AWG 2. External speaker output: i. 2-pin push-in terminal block ii. Wire Range: 20-26 AWG C. Input Power: 1. 2-pin push-in terminal block 2. Wire Range: 14-22 AWG D. Physical I/O: 1. 1 input 2. 1 output 3. 4-pin push-in terminal block 4.
PAGE 12
Architectural and Engineering Specification C. PoE Class: a. Class 1 (IQA32NI & IQA32NE) b. Class 2 (IQA32NX) 2.14 MECHANICAL SPECIFICATION A. Construction: 1. Cast-aluminum ceiling plate (IQA32NI) 2. Cast-aluminum back box enclosure (IQA32NE & IQA32NX) 3. Aluminum trim ring 4. Clear scratch resistant polycarbonate dome bubble. B. Mounting: Surface Mount, Single or double gang outlet box, Wall Mount with accessory. C. Color: 1. Enclosure and trim ring: Cool Gray #2 2. Inner Liner: Black D.
PAGE 13
Architectural and Engineering Specification H. The IP dome camera shall have solid-state components to resist shock and vibration. 2.15 INSTALLATION A. Shall contain a full-featured IP dome camera with integrated varifocal lens. B. Shall be capable of being mounted to a wall or ceiling surface. C. Shall provide video, control, and will be powered over an Ethernet connection. D. Shall provide audio input and output on a push-in terminal block. E.
PAGE 14
Architectural and Engineering Specification 1. Emissions i. FCC, class B part 15 ii. EN 55022: 1998 with A1: 2000, A2: 2003; Class A iii. CISPR 22: 1997 with A1: 2000, A2: 2002; Class A iv. AS/NZS CISPR 22: 2002; Class A 2. Immunity i. EN 55024: 1998 with A1: 2001, A2: 2003 ii. CISPR 24: 1997 with A1: 2001, A2: 2002 B. Safety: 1. EN 60950-1: 2001 with A11: 2004 2. IEC 60950-1: 2001 C. RoHS 1.