Datasheet

ManualsBrandsIQinVision ManualsSecurity CamerasIQA33WE-B5

Architectural and Engineering Specification

IQA33WI, IQA33WE, IQA33WX Page 1 of 14 Revision: (07302013)

IQeye Alliance-pro Series, IQA33WI, IQA33WE, IQA33WX

H.264, 3.6 Megapixel, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated

Varifocal Lens

PART 2 – PRODUCTS

2.1 MANUFACTURER

A. IQinVision

33122 Valle Road

San Juan Capistrano, CA 92675

Phone +1.949.369.8100

Fax +1.949.369.8105

2.2 DESCRIPTION

The product specified shall be an all-in-one vandal/tamper resistant 3.6 megapixel resolution

color dome camera designed for indoor/outdoor applications providing multiple H.264 (MPEG4,

Part 10) and simultaneous MJPEG streams that can be individually configured. The dome

camera was designed to provide 16fps at maximum resolution with audio, and shall conform to

the ONVIF and PSIA standards.

The camera uses a Wide Dynamic Range (WDR) sensor for enhanced image dynamic range and

DTS (Direct-To-Storage) recording. The camera offers Day/Night functionality with high

sensitivity for use in low light indoor/outdoor applications, and is prepackaged with a varifocal

IR corrected lens to allow manual zoom and focus adjustment. The dome camera is constructed

of cast-aluminum housing with polycarbonate dome bubble and auto tracking inner liner. The

dome camera was designed to protect against water and dust to IP66 / NEMA 4 standards.

Requiring low power the dome camera is PoE (IEEE 802.3af) compliant, and can be powered

from 12-24VDC or 24VAC.

2.3 GENERAL REQUIREMENTS

A. The IP dome camera shall be a high impact aluminum, vandal resistant, Day/Night color dome

camera with a progressive scan CMOS sensor.

B. The IP dome camera shall utilize a CMOS sensor that is 1/3-inch with a dichroic infrared mirror

capable of producing a resolution of 3.6 megapixels.

C. The IP dome camera shall have no less than 2560(H) x 1440(V) pixels.

Summary of content (14 pages)

PAGE 1
Architectural and Engineering Specification IQeye Alliance-pro Series, IQA33WI, IQA33WE, IQA33WX H.264, 3.6 Megapixel, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated Varifocal Lens PART 2 – PRODUCTS 2.1 MANUFACTURER A. IQinVision 33122 Valle Road San Juan Capistrano, CA 92675 Phone +1.949.369.8100 Fax +1.949.369.8105 2.2 DESCRIPTION The product specified shall be an all-in-one vandal/tamper resistant 3.
PAGE 2
Architectural and Engineering Specification D. The camera shall be H.264 (MPEG 4, Part 10) compliant. E. The IP dome camera shall provide dual-codec functionality for simultaneous H.264 (MPEG 4, Part 10) and MJPEG video streaming. F. The IP dome camera shall use Main Profile (MP) for mainstream consumer broadcast and storage applications. G. The IP dome camera H.264 encoded video stream shall support video frame rate of 16fps at a maximum resolution of 3.6 megapixel (2560 x 1440). H. The IP dome camera H.
PAGE 3
Architectural and Engineering Specification Q. The IP dome camera shall have a configurable virtual camera window that can be any portion of the field-of-view acting like an independent camera with configurable resolution and frame rate. R. The IP dome camera shall conform to the ONVIF standard. S. The IP dome camera shall conform to the PSIA standard. T. The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant for indoor/outdoor applications. U.
PAGE 4
Architectural and Engineering Specification EE. The IP dome camera shall have a feature (Lightgrabber™II) that enhances camera sensitivity by increasing the integration time of the CMOS sensor. FF. The IP dome camera shall provide automatic white balance, automatic exposure, gain control, electronic shutter, and backlight compensation. GG. The IP dome camera shall provide user configurable saturation, contrast, brightness, and sharpness controls from the web-interface. HH.
PAGE 5
Architectural and Engineering Specification RR. The IP dome camera shall have an event handler allowing the camera to send an image or video clip to on-camera storage, FTP site, email address, and or network attached storage when receiving an internally or externally generated event. SS. The IP dome camera shall support the following licensed On-Camera IQapps. 1. IQaccess: Software that enables multiple users to receive alerts via a pop-up window when the camera receives a hardware or software trigger. TT.
PAGE 6
Architectural and Engineering Specification H. The IP dome camera shall not require unique or proprietary client software for viewing or controlling the camera. I. The IP dome camera shall conform to the ONVIF and PSIA standards. J. The IP dome camera shall be available to users running versions of Internet Explorer™, Firefox™, Safari™, Chrome™, Opera™, or Mozilla™. K. The IP dome camera shall provide secure user and administrator password protection. 2.5 SENSOR A.
PAGE 7
Architectural and Engineering Specification G. Exposure: User configurable H. White Balance: AWB (Automatic) & User programmable I. Backlight Compensation: Auto J. Saturation: User configurable K. Contrast: User configurable L. Brightness: User configurable M. Sharpness: Four levels, User configurable N. Gain Control: AGC (Automatic) O. Motion Detection: Four windows, User configurable P. Access Hours: User configurable 1. Weekdays: On, Off, Timer 2. Weekends: On, Off, Timer Q. Analog Service Port: 1.
PAGE 8
Architectural and Engineering Specification A. Video Compression Standards: 1. H.264 (MPEG 4, Part 10) 2. MJPEG B. H.264 Profile: Main Profile C. Network Streams: 1. Single H.264 or MJPEG stream with configurable frame rate, resolution, bit rate, and quality. 2. Three simultaneous H.264 streams with individually configurable frame rate, resolution, and bit rate. 3. Three simultaneous MJPEG streams with configurable frame rate, resolution, and quality. 4.
PAGE 9
Architectural and Engineering Specification 2. Lens Format: 1/3” 3. 3-13mm 4. F1.4 5. IR-corrected 6. Manual zoom 7. Manual (EZ Glide) focus 8. Fixed iris 2.9 AUDIO A. The IP dome camera shall transmit half-duplex, bi-directional (two-way) audio that is synchronized with the H.264 video stream. B. The IP dome camera shall have an external microphone / line level input on a push-in terminal block for connecting an external monaural microphone or line level audio source. C.
PAGE 10
Architectural and Engineering Specification B. ONVIF C. PSIA D. Web browser E. IQfinder: Software utility to find IQeye cameras. F. IQmanager: Camera management & configuration software G. IQsentry: 4-Channel Camera Management / Recording Software H. Software Update: Remote programmable Flash ROM. 2.11 ON-CAMERA IQapps A. IQaccess 2.12 CONNECTORS A. Network Interface: 1. RJ45 Ethernet connector (IEEE 802.3af PoE compliant) 2. 10Base-T/100Base-TX B. Audio: 1. External Microphone / Line input: i.
PAGE 11
Architectural and Engineering Specification D. Physical I/O: 1. 1 input 2. 1 output 3. 4-pin push-in terminal block 4. Wire Range: 20-26 AWG E. On Camera Storage: 1. 1 Micro SD Class 6+ or higher 2.13 ELECTRICAL A. Input Power: a. 12-24VDC b. 24VAC c. IEEE 802.3af Power over Ethernet B. Power Consumption: a. 3.4 Watts maximum (IQ33NI & IQ33NE) b. 5.2 Watts maximum (IQ33NX) C. PoE Class: a. Class 1 (IQA33NI & IQA33NE) b. Class 2 (IQA33NX) 2.14 MECHANICAL SPECIFICATION A. Construction: 1.
PAGE 12
Architectural and Engineering Specification D. 3-Axis gimbal adjustment: 1. Pan: 360˚ 2. Tilt: 90˚ 3. Azimuth: 350˚ E. Dimensions: 1. IQA33NI: i. 98.6 H x 146.2 W x 146.2 D (mm) ii. 3.88 H x 5.75 W x 5.75 D (in) 2. IQA33NE & IQA33NX: i. 137.6 H x 146.2 W x 146.2 D (mm) ii. 5.42 H x 5.75 W x 5.75 D (in) F. Dome Bubble Diameter: 1. 98.6 (mm) 2. 3.88 (in) G. Weight: 1. IQA33NI: 746 gm 2. IQA33NE: 1196 gm 3. IQA33NX: 1193 gm H.
PAGE 13
Architectural and Engineering Specification A. Temperature rage: 1. IQA33NI & IQA33NE: -20˚C (-4˚F) to +50˚C (+122˚F) 2. IQA33NX: -30˚C (-22˚F) to 50˚C (+122˚F) i. IQA33NX includes a heater and blower. B. Operating Humidity range: 10% to 80% non-condensing. C. Ingress Protection rating: 1. IP 66 2. NEMA 4 D. Impact Protection rating: 1. EN50102, IK 10 (IQA33NE & IQA33NX models) 2.17 ACCESSORIES A. IQAE-BOX Back Box B. IQA-WM Wall Mount Adapter C. IQ800-PMA Pole Mount Adapter 2.18 REGULATORY APPROVALS A.
PAGE 14
Architectural and Engineering Specification (RoHS). 2.19 WARRANTY A. Manufacturer shall warrant the camera to be free from defects in material and workmanship for five years from the purchase date.