The style of communicating Bluetooth Wireless Headset BHS - 601
ENGLISH ENGLISH................................................................................................................................................ 2 Bluetooth Headset BHS-601 User Guide.............................................................................................. 4 Getting to Know Your Bluetooth Headset ............................................................................................. 4 First Time Use ...................................................................
About Bluetooth™ Technology Bluetooth is a technology for wireless communication between devices. Bluetooth technology is based on a radio with a receiver and a transmitter, which have been built into a tiny microchip. One of these microchips is incorporated in the Wireless Headset, and another is integrated into the compatible mobile phone.
Bluetooth Wireless Headset BHS-601 User Guide Getting to Know Your Bluetooth Headset Charging socket Dual Color LED Microphone Figure 1.
Charging your headset: AC Charger USB Charger Cable DC Car Charger Figure 2. The Bluetooth Headset comes with a built-in rechargeable battery. Before using this headset, please fully charge the battery for the first time use.
Charging Options: 1. Plug AC Charger to power supply end of USB Cable, then plug mini USB connector end of the USB Cable to charge jack of the headset. 2. Plug DC Car Charger to power supply end of USB Cable, then plug mini USB connector end of the USB Cable to charge jack of the headset. 3. Plug the USB Cable to the USB Connector of a PC, then plug mini USB connector end of the USB Cable to charge jack of the headset.
Low Battery When the headset is on and the battery becomes low, the LED will blink red color and the headset will "beep" 3 times every 20 seconds. At that time, please recharge the battery as described in the above step as "Charging Your Headset". Turn on the Headset Constantly press Button for 5 seconds until you hear 2 short beeps. The LED will blink blue color for 3 times. Turn off the Headset Constantly press Button for 2 seconds until you hear 2 short beeps. The LED will blink red color for 3 times.
Link headset with phone Once pairing is successful, headset is under Standby -mode. Please refer to procedure below. – For incoming and outgoing calls, phone will link headset automatically. User can talk to microphone of this headset for voice dialing or redial out the last phone number. – For incoming and outgoing calls, phone will link headset automatically. If phone has been cut off link to headset, reconnect procedure as below. 1. Press Button.
To Use Headset To Dial a Call When there is an active connection between the headset and the phone. Dial the number normally on the phone. To Answer a Call When there is an incoming call, a ringing tone will come out of this headset. Press shortly Button or the Button to answer a call. To Reject an Incoming Call When there is an incoming call, ringing tone will come out of this headset. Press 3 seconds to reject a call.
Mute During an active call, press both buttons at the same time. Headset will beep. Press any one of the buttons to disable mute. Voice Activation Under Standby -mode, press Button or Button for 1 second to activate Bluetooth connection. User will hear a beep and then headset is available to use voice activation function. Notice: 1. Before using voice activation, please assure that phone supports this function.
Volume Adjustment During a call, press reduce volume. Button for 1 second to add volume, press Button for 1 second to To Reset the Headset You may want to reset the headset to original setting. This also clears all current pairings. 1. Assure the headset is OFF. 2. Constantly press the Button until LED blinks red and blue color in turn (press more than 30 seconds). 3. Release the Button. 4. Constantly press the Button again until you hear 2 beeps. 5. Connect the headset to the charger for a few seconds.
Warning Headset – Please turn off this headset before putting it into your pocket or bag. If it is not turned off and Button is pressed accidentally, this headset may dial out with unknown. – Do not expose the headset under liquid, moisture or humidity as it is not waterproof. – Do not use abrasive cleaning solvents to clean the headset. – Do not expose the headset under high or low temperatures. – Do not expose your headset to contact with sharpness objects as this will cause scratches and damage.
Product Specifications Bluetooth Specification: Bluetooth Profile Supported: Rang of Frequency: Dimensions: Nominal Charging Time: Talk Time: Standby Time: Version 1.1 Headset and Handsfree Profiles 2.4GHz Spectrum 66mm (L) x 21mm (W) x 11mm (H) Within 2 hours Up to 5 hours Up to 120 hours Because operation of Bluetooth is dependent on individual phone, please refer to phone manual.
12 MONTH LIMITED WARRANTY IQUA Ltd. warrants that this product is free from material and workmanship defects for a period of 12 months from date of purchase provided the following terms of this warranty are satisfied. The warrant applies to the original owner of this product, only. 1. The purchaser must be able to proof the purchase by presenting original sales receipt describing the product to establish the validity of the warranty claim to IQUA Ltd. at the provider of warranty service. IQUA Ltd.