Bluetooth Wireless Headset manual BHS - 601

Link headset with phone
Once pairing is successful, headset is under Standby -mode. Please refer to procedure
below.
– For incoming and outgoing calls, phone will link headset automatically. User can talk to
microphone of this headset for voice dialing or redial out the last phone number.
– For incoming and outgoing calls, phone will link headset automatically. If phone has been cut
off link to headset, reconnect procedure as below.
1. Press Button. Headset will be reconnected to phone and press "yes" on the phone
to accept reconnect mode.
2. Operate phone menu to Bluetooth function and then into program of paired device and
select "BHS-601".
– When headset is under Standby -mode but cannot pick up/dial out call, please follow up
procedure as below for reconnect.
1. Press Button. Headset will be reconnected to phone and press "yes" on the phone
to accept reconnect mode.
2. Operate phone menu to Bluetooth function and then into program of paired device and
select "BHS-601".