Manual and Installation Guide

Series GA201M2 Page 10 Sept 25, 2020
Installation Instructions
Hardware Kits:
Contents:
Bags 1, 2, and 3 will be taped to the internal packaging of the base body. Bag 4 is zip tied to Head assembly
and Bag 5 will be taped to the reflector.
Bag 1 = 8-32 x 3/8” Button Socket (x4)
Bag 2 = A. 3/8” – 16 S.S Nylon Lock Nuts (x6) B. 3/8” S.S Washers (x6)
C. Hold Down Bracket (x3)
Bungee = 15” Bungee Cord
Wheel Kit = A. Wheel Assembly B. 1/4” – 20 x 1/2” S.S Button Sock (x2)
C. 1/4” – 20 S.S Nylon Lock Nuts (x2)
Bag 4 = #10 – 24 Socket Head Screw (x3)
Bag 5 = A. 1/4”-20 x 1/2” S.S Carriage Bolt (x4) B. 1/4” Washer S.S (x4) C. 1/4”-20 Acorn Nut (x4)