Data Sheet_12L_12D_12D7_ Limit Switch Actuators_ENG_V1

Data Sheet 12L/12D Series Limit Switch Actuator_ENG_V1.0
Page 3 / 5
2) External Limit Switch Connection
[Description]
In order to implement a shorter stroke other than the standard 21.8mm stroke, after installing an additional
micro limit switch on the outside, connect the limit switch additionally as shown in the DPDT switch wiring
diagram above.
 When the limit switch is pressed by the actuator rod, the operation stops.
 Pay attention to wiring to avoid short circuit due to incorrect wiring. (The pins of the DPDT switch must not be in
contact with each other)
Dimension (unit : mm)