Datasheet

AUIPS7091(G)(S)PbF
www.irf.com
3
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters
are referenced to Ground lead. Tj= -40°C..150°C, Vcc=6..35V (unless otherwise specified).
Symbol
Parameter
Min.
Max.
Units
Vout
Maximum output voltage
Vcc-63
Vcc+0.3
V
Voffset
Maximum logic ground to load ground offset
Vcc-63
Vcc+0.3
Vin
Maximum input voltage
-0.3
5.5
Vcc max.
Maximum Vcc voltage

60
Vcc cont.
Maximum continuous Vcc voltage

35
Vcc sc.
Maximum Vcc voltage with short circuit protection with Tj < -10°C

28
Iin max.
Maximum IN current
-1
10
mA
Idg max.
Maximum diagnostic output current
-1
10
Vdg
Maximum diagnostic output voltage
-0.3
5.5
V
Pd
Maximum power dissipation (internally limited by thermal protection)

1.25
W
Rth=100°C/W
Isd cont.
Maximum continuous diode current (Rth=100°C/W)

1.8
A
ESD1
Electrostatic discharge voltage (Human body) 100pF, 1500

4
kV
ESD2
Electrostatic discharge voltage (Machine Model) C=200pF,R=0,L=10µH

0.5
Tj op max.
Max. operating temperature junction temperature
-40
+150
°C
Tj Sto max.
Max. storage temperature junction temperature
-55
+150
°C
Thermal Characteristics
Symbol
Parameter
Typ.
Max.
Units
Rth1
Thermal resistance junction to ambient SO8 std. footprint
100

°C/W
Rth1
Thermal resistance junction to ambient TO220 free air
60

Rth1
Thermal resistance junction to ambient D2Pak std. footprint
60

Rth2
Thermal resistance junction to ambient D2Pak 1” sqrt. footprint
40

Rth3
Thermal resistance junction to case D2pak/TO220
4

Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol
Parameter
Min.
Max.
Units
VIH
High level input voltage
4
5.5
V
VIL
Low level input voltage
-0.3
0.9
Iout
Continuous drain current, Tamb=85°C, Tj=125°C, Vin=5V, Rth=100°C/W

1.5
A
Rin
Recommended resistor in series with IN pin
10
20
k
Rdgs
Recommended resistor in series with DG pin
10
20
Rol
Recommended pull-up resistor for open load detection
5
100