User's Manual

Wireless Digital Flat Panel Detector Mars1717X
66 User Manual of Mars1717X
2. After receiving the Cmd_Prep, it will start the prepare process, and send back the acknowlage
3. The max
4. User starts the X-Ray.
5. after the X-Ray is end.
6. The preview image will be always sent, which is 4x4 averaging, the raw X-Ray image will be
sent if the HW correction is disabled with the raw offset image follows, otherwise, the X-Ray
image will not be sent and only the corrected image will be transferred.
4.8. AED Mode
4.8.1. Inner
IDLE
XWIN1
(fixed)
X-Ray
imaging
XWIN1
(fixed)
Offset
imaging
X-Ray Info
RAW Preview
RAW X-Ray image
If HW-offset is disabled
RAW Offset(Or corrected)
image
Low power
Prep Ack
1. exit
2. When the detector is in idle state, user can start the X-Ray any time.
3. When the X-Ray starts, the detector will sense the X-Ray automaticlly, the XWIN is configured
needs to make sure that the XWIN is larger than the X-Ray time.
4. After the XWIN is end, then the detector will start the acquisition flow.
5. The preview image will be always sent, which is 4x4 averaging, the raw X-Ray image will be
sent if the HW correction is disabled with the raw offset image follows, otherwise, the X-Ray
image will not be sent and only the corrected image will be transferred.