User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
4. Software Setup
iRay Technology Co. Ltd. 59
The IP address should be
identical with Cfg_HostIP
item in
work_dir\Mars1717V3\co
nfig.ini file.
4. Panel setup
Either Wired Cable or AP
mode can be used to
configure detector
To start configuration
with wired cable. It is
necessary to finish 4.4,
then proceed to the steps
below.
To start configuration
with AP. It is necessary
to finish 4.5, then
proceed to the steps
below.