User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
Mars1717V Digital Flat Panel Detector User Manual
74 iRay Technology Co. Ltd..
5.1.3 Inner Mode
5.1.3.1 Block Diagram
Workstation is a host PC device installed with IDetector and SDK. Chapter 3 has
described how to establish connection between panels and workstation. In inner
mode, workstation does not control X-ray generator. Users would decide when to
shoot X-ray.
5.1.3.2 Work Flow
Click “Prepare”
Panel preparation, Wait until the warning message change from “Exposure
Prohibit” to “Exposure Enable”
Shoot X-ray in exposure window. However the longer time user waits. the
worse image would be. So please shoot once X-ray generator is ready.
After shooting, X-ray sensor in panel would trigger panel to start image
acquisition.
Wait for image uploaded