User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Safety and Regulatory Information
1–2 AJ4310 | 2019-08-13
This indicates that the product has passed CE certification and is fol-
lowed by the CE number.
This is used to identify the manufacturer’s series number, which is after,
below, or adjacent to the symbol. The series number usually consists of
19 digits as shown in the following example:
1A2A3A4 B1B2 C1C2 L M1M2 D1D2 Y1Y2 X1X2X3X4
• 1A2A3A4 - Product code
• B1B2 - Derived classes
• C1C2 - Version
• L - Production site
• M1M2 - Month
• D1D2 - Day
• Y1Y2 - Year
• X1X2X3X4 - Numerical order
This indicates the name and address of the manufacturer.
This indicates the name and address of a Carestream authorized repre-
sentative in the European region.
This indicates consulting the user guide for general information.
Safety sign: Dangerous Voltage
Handle with care.