User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Safety and Regulatory Information
AJ4310 | 2019-08-13 1–7
Power Supply
Power Supply
WARNING:
Do not operate the product with a power supply other than the one indicated
on the rating label to avoid fire or electric shock.
WARNING:
Do not handle the product with wet hands to avoid electric shock that could
result in death or serious injury.
WARNING:
Do not place heavy object on cables and cords. Co not pull, bend, bundle, or
step on them to prevent damage to the sheath. Do not alter them.
Avoid damage to the cords, which could result in fire or electric shock.
WARNING:
Do not supply power from the same AC outlet to more than one product to
avoid fire or electric shock.
WARNING:
Do not turn on system power when condensation has formed on the equip-
ment to avoid fire or electric shock.