User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Safety and Regulatory Information
1–10 AJ4310 | 2019-08-13
Handling
Handling
WARNING:
No modification is allowed. Never disassemble or modify the product to avoid
fire or electric shock.
The product incorporates parts that may be hazardous or cause electric shock
Touching them may cause death or serious injury.
WARNING:
Do not place an object on top of the product. The object may fall and cause
an injury.
Metal objects such as needles or clips that fall into the product or spilled liquid
may result in fire or electric shock.
WARNING:
Do not strike, drop, or cause a strong jolt to the product to prevent damage
and avoid fire or electric shock.
Handling
WARNING:
Do not place the product and pointed objects together to prevent damage.
If so, it should be used in Bucky.
WARNING:
Have the patient take a fixed posture and do not let the patient touch parts
unnecessarily.
If the patient touches connectors or switches, it may result in electric shock or
malfunction.