User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Safety and Regulatory Information
1–16 AJ4310 | 2019-08-13
When a Problem Occurs
Medical Equipment Classification
When a Problem Occurs
WARNING:
If any one of the following occurs, immediately disconnect the power cord of
the adapter or battery, and contact your sales representative or local dealer:
• When there is smoke, an odd odor, or abnormal sound
• When liquid has spilled into the equipment or a metal object has entered
through an opening
• When the product has been dropped and damaged
Type of protection against electrical shock External electrical power source equipment Class I
Equipment (medical approved adapter)
Internal electrical power source equipment (battery)
Degree of protection against electrical shock Type-B applied part
Degree of protection against ingress of water IPX1
Mode of operation Continuous operation
Flammable anesthetics Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Not suitable for use in an oxygen-rich environment