User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
AJ4310 | 2019-08-13 2–1
2
Overview
The TRIMAX 35C Detector is a cassette-size, wireless x-ray flat panel detector based on
amorphous silicon thin-film transistor technologies. It is developed to provide the highest
quality of radiographic images with an active matrix of 2304 × 2800 with 150 um pixel
pitch. The detector supports wireless communication between the panel and the
workstation and is powered by an internal battery.
Scope
This manual contains information about the TRIMAX 35C. Information in the manual,
including the illustrations, is based on a prototype. If your system configuration does not
have features described in this manual, the information does not apply to your detector.
Features
• Wireless static flat panel detector used for general radiography
• Cassette-size
• Sync-shot exposure trigger
• CsI scintillation screen
• Easy-to-change cable and easy-to-update firmware
• Battery recycling