User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Overview
AJ4310 | 2019-08-13 2–7
Battery
Item Specifications
Model Battery-KV
Rated capacity Typ. 4180 mAh @ Discharge 0.2C
Nominal voltage 10.8 V
Charge voltage 12.6 ± 0.05 V
Discharged end voltage 9 V
Charging method CC-CV
Operating temperature Charge 0–60 °C (32–140 °F)
Discharge 0–60 °C (32–140 °F)
Storage temperature ≤3 month -20 °- +45 ° (-4–113 °F)
≤6 month -20°- +35 ° (-4–95 °F)
Relative humidity 5 %~95 %
Dimension (L × W × H) 210 x 115 x 7.5 mm
Weight 0.28 kg (0.62 lb)