User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Overview
2–8 AJ4310 | 2019-08-13
Battery Charger
Power Supply
The product must be used with the approved adapter and CB certificate number
SG PSB-MD-00191.
Item Specifications
Model Charger-Combo
Simultaneous Charging 1 Battery Pack
Full Charging Time ≤ 3 hr
Rated Power Supply 90~264 V (ac)
Dimension (L × W × H) 240.0 x 184.0 x 38.0 mm (9.4 x 7.2 x
1.52 in.)
Weight 0.55 kg (1.2 lb)
Item Specifications
DC Power 24V (dc), 0.75A
Battery Package 10.8V (dc), 1.6A