User's Manual
Table Of Contents
- 1 Notices and Conventions
- Contents
- 1 Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings A-1
- Operating Modes A-8
- Software Installation A-12
- Set the Connection Mode A-13
- Shortcuts A-24
- Establish a Connection with the Detector A-25
- Configure the Detector A-26
- Correction and Calibration Template Generation A-29
- Image Check and Upload A-35
- Defect Template Check and Modification A-37
- Correction and Calibration Management A-40
- Update the Firmware A-44
- Publication History
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- A Appendix
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
AJ4310 | 2019-08-13 A–1
A
Appendix
Software and Settings
Main Interface
Item Description Function
1 Home Home page, shows the list of the detectors
2 Acquire Acquire images, free for use after connecting the detector
3 SDK Configure UI for SDK, free for use after connecting the detector
4 Detector Configure UI for detector, free for use after connecting the detector
5 Calibrate Calibrate UI, for generation and management of the calibration tem-
plate
6 Local File Image management, free for use at any time
7 Connect Connect the detector