User's Manual

Power on the Detector
On the control panel, the power button is used to power the detector on and off.
To power on the detector, press and hold the power button for 2 seconds. The detector
must either have a battery installed with > 15 % charge or have the DC power
connected.
To power off the detector, press and hold the power button for 4 seconds.
Power Indicator
Power Indicator Lighting Status
Status
Battery Capacity DC Input Description
OFF N/A N/A
Detector is
OFF
Green ON N/A Yes
Detector is
ON
Green ON > 10% No
Detector is
ON
Orange Blinking > 6% and ≤10% No
Detector is
ON
Operation
AL4609 2-11 2021-09-21