User's Manual

Power Indicator Lighting Status Description
Green Blinking
1. Press and hold the Mode button for approximately
seven seconds. When the status LED indicator
starts to blink, release the button.
The Mode LED indicator blinks green indicating
that the detector is in AP mode.
2. Press and release the Mode button. The Mode
LED indicator will blink from green to blue,
indicating that WIFI mode has switched from AP
to Client.
3. The setting will be valid if the Mode button is not
pressed again for seven seconds.
Off
• Detector is OFF
• Client connection is not built
Operation
AL4609 2-14 2021-09-21