Instruction manual

22
Manual Tune:
1. Repeatedly press BACK, and then press or to < Manual tune >, press SELECT to
confirm.
2. Press or to step between the channels and press SELECT to select the current
channel.
 Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a tuning
meter with the signal strength and the multiplex name after a few seconds.
3. Press BACK to exit this order.
Prune invalid:
1. Repeatedly press BACK, then press or to < Prune invalid >, press SELECT to
confirm.
2. Press or to ‘YES’, and press SELECT to confirm.