I n s t r u c t i o n M a n u a l f o r IKR1224DAB
Safety Precautions To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate the unit, this will assure you years of faithful, trouble free performance and listening pleasure. Important Notes • This safety and operating instruction should be retained for future reference.
Safety Information Some Do’s and Don’ts on the safe use of equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
Table of Contents Safety Precautions ................................................................................................. 2 Package Content .................................................................................................... 5 Front Overview ............................................................................................................ 6 Right Side Overview .....................................................................................................
Package Content Main Unit Adapter Instruction booklet
Front Overview Control All mode a. Press to turn on/off Radio b. When alarm is coming, press to turn alarm off STANDBY SOURCE MENU SELECT PRESETS 6 Press to shift to another mode Press to Main menu and system settings a. b. c. d. Press or to cycle through options.
Right Side Overview Note: upgrade socket is for radio technician handle only.
DAB MODE Turn on 1. Extend the antenna found on the back of radio, press STANDBY to switch on radio. 2. For initial use, radio will make a full scan and store all detected stations into memory. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. The first station in the list would be selected. Note: if no DAB/DAB+ signal is found in your area, it may be necessary for you to relocate your radio.
To Show the Signal Strength During play a DAB/DAB+ program, the path for showing current station’s signal strength is pressing MENU Display Signal strength, press SELECT to confirm. The LCD screen display will show a signal bar with the strength of the current station. The indicator on the signal bar shows the minimum acceptable signal level. Note: Stations with signal strength below the minimum signal level will not provide a steady stream of audio.
DAB/DAB+ Menu Tree 10
FM MODE Tune in FM Mode 1. Press SOURCE to switch your radio from DAB mode to FM mode. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station should be selected. 3. To manually change FM frequency, while frequency is showing up, press or to change it 0.05MHz per step. 4. To automatically scan FM available stations, while frequency is showing up, simply press SELECT.
View Station Information Note: It is possible to view more information that is displayed on the second line of the display. 1. Press MENU, and it will show ‘Display’, press SELECT to confirm. 2. Press or to check through the options: ‘Radio text’, ‘Program Type’, ‘PS’ (currently program name), ‘Audio info’ and ‘Date’. 3. While your target option is showing up, press SELECT to confirm.
GENERAL OPERATION Set Station Presets Note: this function is for DAB/DAB+ and FM mode use only. 1. While playing your favourite station, press and hold PRESETS, and then press or to cycle through the preset stations store numbers1-10. 2. Then select your preferred preset station number and press SELECT to confirm. Play a Preset Station Note: this function is for DAB/DAB+ and FM mode use only. To select a stored station: 1.
System setup The way to enter System Setup 1. Press MENU, and then press or to < System >, press SELECT to confirm. 2. Press or to cycle through the System Menu options: ‘Sleep’, ‘Alarms’, ‘Time’, ‘Equaliser’, ‘Backlight’, ‘Language’, ‘Factory Reset’ and ‘SW Version’. Set Sleep Note: you might want your radio turn itself off after a certain time, follow below steps, it can be easily achieved. 1.
Set Alarm Note: Setting Alarm, make sure Clock time is set at first. 1. It can be activated from ‘System’ ‘Alarms’, press SELECT to confirm. 2. Press or to your target alarm: ‘alarm 1’ or ‘alarm 2’. 3. Let’s take set alarm 1 as example, while ‘alarm 1’ is showing up, press SELECT to confirm. 4. While it shows: “Alarm 1 Setup”, press SELECT to confirm. 5. Now, follow your radio instruction, configure the following parameters: ∗ ∗ ∗ Alarm states: On or Off, press or to ‘On’, press SELECT.
Set Equaliser Note: Equaliser is a user-defined setting through Bass and Treble: Treble : +3,+2,+1,0,-1,-2,-3 level. Bass : +3,+2,+1,0,-1,-2,-3 level. 1. It can be activated from < System > < Equaliser >. Press SELECT to confirm. 2. Press or to your preferred option: Treble or Bass, press SELECT to confirm. . 3. Press or to the level you favor, press SELECT to confirm, and it is done! Set Backlight Note: You can adjust the backlight level to ‘High’, ‘Medium’ and ‘Low’.
Specification ITEMS DESCRIPTION Specifications: DAB/DAB+ and FM Digital Radio Audio Output: 5Wrms x 2 FM: 87.