Operation Manual

DAB Mode

Turning on

Connect the plug at the end of power adapter cable to DC in jack on the back of unit. Insert

power adapter to mains supply.

Press POWER button to switch radio on. Press POWER button to switch radio to standby

mode.

To turn off radio completely, unplug power adapter from mains supply.

Initial scan

1. When you radio is switched on for the first time, it will carry out a full scan and stored all

DAB/DAB+ radio stations.

2. In use, you can press SCAN button on the top of unit to perform a full scan.

3. The auto search may take a few minutes to complete. After completion the radio will

tune in on the first station in its storage list.

 Note: a. The DAB/DAB+ stations will be displayed and stored in alphanumeric order.

b. If no DAB/DAB+ signal are found, it may be necessary for you to relocate your radio.

Station List

1. Turn the SCROLL/SELECT knob to browse station list.

2. Press the SCROLL/SELECT knob while the program you want to play hops on.

View Station Information

There is a variety of station information transmitted by broadcast, and this radio offers a

convenient way for you to view them.

To view currently playing station information, press the INFO button repeatedly the display

will show the information through DLS (Dynamic Label Segment), Signal Strength, Program

Type, Ensemble, Program Frequency, Signal Quality, Bitrate, Time and Date on the display.