Bedienungsanleitung IKR1360DABBTBLK DAB+/UKW/CD/Bluetooth
Sicherheitsmassnahmen Für den höchsten Genuss und Leistung, sollten Sie sich mit den Merkmalen vertraut machen. Lesen Sie dieses Handbuch bitte sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. Dies garantiert viele Jahre zuverlässige, störungsfreie Leistung und Hörvergnügen. Wichtige Hinweise Diese Sicherheits- und Betriebsanleitung sollte für zukünftige Verwendung aufbewahrt werden.
und stellt kein Problem an dem Gerät dar.
Sicherheitsinformation Was man zum sicheren Gebrauch des Gerätes tun oder sein lassen sollte. Dieses Gerät wurde konstruiert und hergestellt, um die internationalen Sicherheitsstandards zu erfüllen, aber es muss wie bei jedem anderen elektrischen Gerät darauf geachtet werden, dass die besten Ergebnisse erreicht werden und die Sicherheit gewährleistet ist. WAS ZU TUN IST: Lesen Sie die Bedienungsanleitung, bevor Sie versuchen, das Gerät zu verwenden.
Inhalt Sicherheitsmassnahmen ......................................................................................................................................2 Sicherheitsinformation .........................................................................................................................................4 Inhalt............................................................................................................................................................................
Lieferumfang Hauptgerät Fernbedienung Bedienungsanleitung Netzteil 6
Oberseite 6. MENU 1. VOLUME Menüoptionen aufrufen. Lautstärke erhöhen und verringern. 7. INFO 2. POWER Informationen zum Sender anzeigen. Radio einschalten. Mit erneutem Tastendruck Radio 8. PRESETS ausschalten (Stand-by-Modus). Zum Speichern von Sendern gedrückt halten. 3. ALARM Zum Aufrufen von gespeicherten Weckalarm aktivieren. Sendern kurz drücken. 4. SCAN Sendersuche nach DAB- und 9. REPEAT CD-Wiedergabemodus umschalten. UKW-Sendern. 10. SCROLL/SELECT 5.
Frontansicht 11. (in CD- und Bluetooth-Modus) 14. Mit Tastendruck zum vorherigen Titel springen. Wiedergabe beenden. 15. Für schnellen Rücklauf gedrückt halten. 12. 13. (in CD- und Bluetooth-Modus) Mit Tastendruck zum nächsten Titel (in CD-Modus) Drücken, um die CD aus dem CD-Fach auszuwerfen. (in CD- und Bluetooth-Modus) Wiedergabe starten/unterbrechen. (in CD-Modus) 16. CD Fach 17. LCD-Display 18. Sensor Fernbedienung springen. Für schnellen Vorlauf gedrückt halten. Geräterückseite 21.
Tastenbelegung Fernbedienung 3. INFO Informationen zum Sender anzeigen. 4. SELECT Auswahl bestätigen. 5. und (in CD- und Bluetooth-Modus) Mit Tastendruck zum vorherigen oder nächsten Titel springen. Für schnellen Rücklauf oder Vorlauf gedrückt halten. 6. (in CD- und Bluetooth-Modus) Wiedergabe starten/unterbrechen. 7. MUTE Radio stummschalten. Mit erneutem Tastendruck Stummschaltung aufheben. 8. MODE Umschalten zwischen DAB, UKW, AUX, CD und Bluetooth. 9. MENU Menüoptionen aufrufen. 10.
DAB-Modus Einschalten Schliessen Sie das Netzteilkabel am Netzteileingang auf der Geräterückseite an. Stecken Sie das Netzteil in die Steckdose. Drücken Sie POWER, um das Radio einzuschalten. Drücken Sie POWER, um das Radio auszuschalten (Stand-by-Modus). Zum vollständigen Ausschalten des Radios ziehen Sie das Steckernetzteil aus der Steckdose ab. Erste Sendersuche 1. Beim ersten Einschalten Ihres Radios wird ein vollständiger Scan durchgeführt und alle DAB/DAB+ Sender werden gespeichert. 2.
Senderspeicher Sender speichern Sie können bis zu 30 DAB/DAB+ und UKW-Sender speichern. Dies erleichtert die Sendersuche für Ihre Lieblingssender. 1. Halten Sie PRESETS gedrückt, bis „Preset Store <1: (Empty)>“ angezeigt wird. 2. Drehen Sie SCROLL/SELECT, um die Senderspeicher 1-30 zu durchlaufen. 3. Wählen Sie den gewünschten Senderspeicher und drücken Sie SCROLL/SELECT; im Display wird „Preset # stored“ angezeigt. Senderspeicher aufrufen 1. Drücken Sie MODE zur Auswahl des gewünschten Modus. 2.
UKW-Modus UKW-Empfang Drücken Sie MODE zur Auswahl des UKW-Modus. Bei Erstgebrauch stellt sich das Radio auf die Frequenz 87,50 MHz ein. Anderenfalls wird die letzte UKW Station, die Sie gehört haben, ausgewählt. Automatische Sendersuche Drücken Sie SCAN, um die automatische Sendersuche zu starten. Manuelle Sendersuche Drehen Sie SCROLL/SELECT, um die Frequenz um jeweils einen Frequenzschritt von 0,05 MHz zu erhöhen oder zu verringern.
AUX-Eingang In diesem Modus können Sie einen MP3-Player oder ein anderes externes Audiogerät anschliessen. 1. Schliessen Sie Ihr externes Audiogerät über ein 3,5-mm-Audiokabel (nicht mitgeliefert) am Eingang AUX IN auf der Geräterückseite an. 2. Dann stecken Sie das Netzteil in die Steckdose und drücken Sie POWER, um das Gerät einzuschalten. 3. Drücken Sie MODE zur Auswahl des AUX-Modus. 4. Im AUX-Modus steuern Sie Ihr Wiedergabegerät direkt. 5.
CD-Wiedergabe CD-Modus wählen Legen Sie eine Audio-CD ein. Nicht alle CDs sind mit dem Gerät kompatibel. 1. Drücken Sie MODE zur Auswahl des CD-Modus; ist keine CD im Laufwerk, so wird „NO DISC“ angezeigt. 2. Legen Sie eine Audio-CD in das CD-Laufwerk ein, im Display wird „READING“ angezeigt. 3. Drücken Sie , um die CD aus dem Laufwerk auszugeben, im Display wird „OPEN“ angezeigt. CD-Programmwiedergabe 1.
Wiedergabemodus einstellen 1. Drücken Sie REPEAT, um den Wiedergabemodus einzustellen. 2. Drehen Sie SCROLL/SELECT zur Anzeige der Optionen: „Repeat off“, „Repeat one“, „Repeat All“, „Repeat Folder“ und „Random“. 3. Drücken Sie SCROLL/SELECT zur Bestätigung. Bluetooth-Modus Das Gerät ist mit der Bluetooth-Funktion ausgestattet und empfängt Signale aus bis zu 10 m Entfernung. 1. Führen Sie das Pairing für das Gerät mit einem Bluetooth-Gerät durch: 2. Drücken Sie MODE zur Auswahl des Bluetooth-Modus.
Allgemeine Informationen zum Betrieb EQ einstellen Hier stellen Sie das Klangprofil ein. 1. Drücken Sie MENU zur Auswahl von „Set EQ“, dann drücken Sie SCROLL/SELECT zur Bestätigung. 2. Drehen Sie SCROLL/SELECT und drücken Sie den Drehknopf zur Auswahl von Normal, Rock, Pop, Classic, Jazz oder My EQ. 3. Zum Einstellen Ihre persönlichen EQ-Einstellung wählen Sie „My EQ“, dann stellen Sie die Höhen und Bässe ein. Uhr einstellen 1.
Weckalarm einstellen Auf Ihrem Radio können zwei Weckalarme eingestellt werden. Vor dem Einstellen des Alarms muss zunächst die Uhrzeit eingestellt sein. 1. Drücken Sie ALARM zur Aktivierung der Alarmeinstellung. Alternativ drücken Sie MENU und drehen Sie SCROLL/SELECT zur Auswahl von „Set Alarm“. Drücken Sie SCROLL/SELECT zur Bestätigung. 2. Drehen Sie SCROLL/SELECT zur Auswahl von „Alarm 1 Off“ oder „Alarm 2 Off“, dann drücken Sie SCROLL/SELECT zur Bestätigung. 3.
Hintergrundbeleuchtung einstellen 1. Drücken Sie MENU und drehen Sie SCROLL/SELECT zur Auswahl von „Backlight“. Drücken Sie SCROLL/SELECT zur Bestätigung. 2. Drehen Sie SCROLL/SELECT zur Auswahl von „Active“ oder „Standby“, dann drücken Sie SCROLL/SELECT zur Bestätigung. 3. Drehen Sie SCROLL/SELECT zur Auswahl der Beleuchtungsstufe 1-5, dann drücken Sie SCROLL/SELECT zur Bestätigung. Schlummerzeit einstellen Sie können den Weckalarm vorübergehend unterbrechen. 1.
2. Drücken Sie SCROLL/SELECT zur Bestätigung.