Operation Manual

11
∗ Under Standby Mode
1. Refer above step1, while it says ‘Backlight <Power on>’, press or to ‘Standby’, press
SELECT/NAV to confirm.
2. Refer above step 2-3 setting it, you can also choose low to reduce any light disturbance in case you are staying in
a dark room.
How to Set Language
1. Press MENU and then press or to select Language menu, press SELECT/NAV to confirm.
2. Press or to select your desired one, press SELECT/NAV to confirm.
How to Factory Reset
 Note: Doing this will reset and delete all the preset stations and return radio to its factory settings.
1. Press MENU and then press or to select Factory Reset menu, press SELECT/NAV to
confirm.
2. Press
or to select YES from ‘Factory Reset? <No> Yes’, press SELECT/NAV to confirm.
How to Software Upgrade
 Note: Please leave this to professional only, if your unconsciously pushed this order, please power up your radio again to
have your radio back to normal working condition.
How to get SW Version
 Note: You can obtain the software version from this.
1. Press MENU and then press to select SW version menu, press SELECT/NAV to confirm, and then
you get it!