SL-A710 M ASSAGE CHAIR OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS
Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our company reserves the right to change and explain the design of the product.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warnings ·Do not allow children to touch any movable part of this product. ·Use the well-grounded power supply unit suitable for this product. ·Pull out the plug after use or before cleaning to avoid any physical injury or damage to the product. ·Operate this product as instructed in this manual. ·Do not use any parts or accessories which are not recommended. ·Do not use this product outdoors.
Safety Warning Safety Warning Warning Warning When the legrest of the massage chair is lifted, nobody should apply pressure on the legrest to prevent the massage chair from falling forward which will damage this product or result in personal injuries. Do not remove or pull out the remote controller cable or the power cord in the standby or power-on state to avoid any damage to this product or accidental electric shock of a body part.
Safety Warning Safety Warning Warning Warning Before using the massage chair, remove any hard objects in your pocket(s) or any jewelry carried with you (e.g. key, watch, other similar portable hard objects) to avoid any damage to this product or physical injury during massage. Please do not fall asleep on the massage chair while using to avoid personal injury caused by unconscious use.
Safety Warning Name of Components 1 2 Warning When adjusting the footrest retractable function or when footrest is declining, please be sure not to put hard objects (such as keys, mobile phones, Etc.) or put the hand into the gap of the footrest, and the intersection with the armrest; To avoid product damage or personal injury caused during the process.
Function Function ·This product has designed a group of AI massage robots that can walk up and ·The guide rail of the backrest frame adopts curved guide rail technology, which down, stretch back and forth, and are silent in design.
Touch screen manual controller interface introduction Method of Usage Touch screen remote controller introduction Ⅰ、Switch 7 1 power supply on Diagram of plug in Diagram of the switch position of power supply Diagram of line 2 POW POW ER INP ER INP UT UT ON 3 ON /O FF /O FF Stress Relieving Waist Care 16min Manual Customise Angle Setting 4 Energy 8 Good-night Sleep 2 06 Joint Care 5 Neck&shoulder care 9 Spine Massage Thai Massage 6 Upper Air Lower Air More Ⅱ、Massage fu
Method of usage Method of usage · When you select any of the automatic modes, the backrest and calf position will 2)、The pause button ·While the massage function is operate, press the “Pause” button to temporarily stop all massage functions; Press the “Pause” button again to continue the massage. If the pause time exceeds 20 minutes, all massage functions are automatically turned off. be adjusted to the set angle.
Method of usage Method of usage 4)、Automatic function ·There are four different automatic massage scenes in Auto mode: ·VIP Auto Program: Stress Relieving, Energetic Morning, Good-night Sleep, Joint Care, Neck&shoulder care, Spine Massage. ·Healthcare Auto Program: Office Regimen, Sport Recovery, Brain Refresh, Spine Care, Waist Care, Legs Care. ·Special Auto Program: Health Recharge, Meridian Treatment, Keep Fit, Bottom Toning, Restoration Massage, Tiredness Relief.
Method of usage Method of usage 5)、Manual ·Click the “ ” icon to enter the manual massage function selection interface, including manual, manual strength and width, back stretch, upper airbag massage, lower air bag massage, calf squeeze, foot rollers, Negative oxygen ions, heat and other massage functions. ·Click the “ ” icon to close the manual massage interface.
Method of usage Method of usage Description Function Point Press button once, a single dot appears in the display. Massage apparatus will stay stationary. Local Press button again, two arrows appear. Massage apparatus will move in an approximately 3 inch range. Upper back Round back massage. 04)、 Manual - calf squeeze Calf ·Select to turn the calf massage function on or off by pressing the “ Knead ” button; There are three different calf massage modes.
Method of usage Method of usage 06)、Manual - negative oxygen ion ·Click the “Negative Ions ” button to select switch on or off the negative oxygen ion massage function. You can also click the “ ” icon to close the manual massage interface.
Method of usage Method of usage 01). Zero gravity adjustment 8)、Settings Description Function Zero gravityⅠ: Automatically adjust the calf and backrest position to zero gravityⅠposition. ·Click the “ ” button icon to enter the setting selection interface, including backlight brightness adjustment, sleep time adjustment, button volume switch, serial number, language selection and other settings. ·Click the “ ” icon to close the settings interface.
Method of usage Method of usage 9)、Bluetooth III.Introduction to Armrest Shortcut Keys ·Click the “ ” icon to switch on or off Blue tooth. “ ” is to switch off the Blue tooth status, and “ ” is to switch on the Blue tooth status. ·After the Blue tooth-enabled audio source device (such as mobile phone, MID tablet, etc.
Method of usage Function Method of usage Description On/Off key: short press this key to suspend operations and press it for 3 seconds to turn it on and off. If the pause lasts for more than 20 minutes during massage, all massage functions will be automatically turned off. 4D 4D intensity knob key: Adjust the massage intensity of 4D manipulator (weakened when rotating counterclockwise, enhanced when rotating clockwise), and the intensity ranges from Level 1 to Level 5.
Method of usage Method of usage V. Turn off power, stop massage 5. Hold the armrest with both hands, first hook the front end of the armrest, hang it in the seat frame steel and press down the front end of the armrest. (Figure 5) 6. Then, align the male buckle on the rear end of the armrest with the female buckle on the capsule, insert the rear end of the armrest into the female buckle of the capsule and snap it tightly (note that the fit gap of the armrest capsule should be even).
Method of usage Method of usage VII. Installation Instructions for Legrest 5.Next, hang the legrest (left and right rotation shafts) into the rotation shaft cover supporting such frames simultaneously (Figure 5). 6.Place the rotation shaft cover. Press the rotating outer sleeve of the legrest. Then tighten the rotation shaft cover supporting the legrest with two M5×14 black zinc environmentally-friendly hexagonal socket head screws and a 6×12×1.
Method of usage Method of usage VIII. Installation Instructions for Legrest 1. Align the positioning column of the bracket assembly with the positioning hole of the armrest bracket support plate and lock it with 3 cross-recessed screws (Figure 1). 2. Then fasten the decorative cover of the support (Figure 2). Figure 1 Figure 2 IX. Use of the shawl ·It is provided with a unique shawl assembly, with innovative heating functions on the shoulder, back, waist and abdomen and heating with graphene.
Method of usage Legal notices XI. Floor Protection FCC Information ·Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ·This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
