Instruction Manual

Part Name Toxic and harmful substances or elements
Pb Hg Cd Cr(VI) PBB PBDE
Housing O O O O O O
PCB X O O O O O
Power Adapter X O O O O O
Accessories O O O O O O
This table is prepared in accordance with SJ/T11364
O: Indicates that the content of the toxic and harmful substance in all homogeneity of the
component is below the limit specified in the GB/T26572 standard
X: Indicates that the content of the toxic and harmful substance in a
t least one homogenous
material of the component exceeds the limits specified in the GB/T26572 standard
The "X" shown in this table indicates the use of the EU RoHS exempon for certain hazardous
substances in specific applicaons
This eco-friendly life period applies only to the product working under the condions specified in
the manual
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
FCC Warning:
Initial setting
Power On
2 Wi-Fi signals:
GL-SF1200-xxx
GL-SF1200-xxx-5G
Connect to Wi-Fi
Default password: goodlife
(Shown on the bottom label)
Searching the 2 SSIDs beginning
with “GL-SF1200” to join
Default password: goodlife
Set up the router
In web browser, input
http://192.168.8.1
to access router user
interface(UI), select language
to set up the router
Or connect via LAN
Use ethernet cable
to connect PC and router
Key-in address in web browser
http://192.168.8.1
Product
LED light
Restore settings
Power port to connect
power adapter in the box
LAN port connect
PC/laptop via LAN cable
Reset button
to restore all settings
to default
For more help:
Send email to [e-mail]
Ask question on OpenWRT, LEDE or other professional forums
You can follow the instructions below if you couldn’t access UI nor connect to router:
Push the “Reset” button for 3 seconds then release, to restore the network
Push the “Reset” button for 10 seconds then release to restore all setting to factory default
Technical support
Warranty statement
The factory provides limited warranty period for routers (one-year)
and accessories (3 months), additional warranty needs to refer to local laws
Please use standard 12V/1A power adapter
Any failure or damage to the router that is not used as required by the instructions
will invalidate this warranty statement
Any modification of the board, components, or housing resulting in router failure or
damage will invalidate this warranty statement
Any problems caused by the use of third-party firmware may not be officially supported
by the Company
Any improper use, such as improper input voltage, high temperature, water intake, or
damage to the housing, will invalidate this warranty statement
The images shown in the instruction manual are for informational purposes only, and
within the scope of laws and regulations, the right to interpret this commitment shall be
vested in Shenzhen Dinghe Communication Co., Ltd.
The contents of the instructions are subject to change without notice
Shenzhen Dinghe Communication Co., Ltd.
1802, Baoyunda Information Building, Baoan, Shenzhen
([phone])
Let’s Go To Ride Wi-Fi
BH450
802.11ac Dual Band Wi-Fi Router
password
Statement of hazardous substances in
electronic information products