User Manual
Table Of Contents
- 1.0 Product Overview
- 2.0 Standards Compliance
- 3.0 Physical Specifications
- 4.0 Electrical Interfaces
- 5.0 Instructions for the safe Installation and use of the 9522B LBT
- 6.0 Modem Commands and Configuration
- 7.0 Installation of the 9522B in place of a 9522A
Iridium Satellite LLC
9522B L-Band Transceiver Product Information Guide
7.0 Installation of the 9522B in place of a 9522A
The 9522B is designed to replace the 9522A with the assistance of an optional adapter plate and cables.
An adapter plate is mounted onto the 9522B and provides mounting points similar to those of the 9522A.
The antenna cable adapter provides a cable-mounted TNC connector similar to the 9522A. The Multi-
interface adapter cable provides a mechanical and electrical interface similar to the 9522A (although please
see the note in section
7.2 below)
7.1 Physical characteristics
The physical design of the 9522B adapter is given in Figures 7-10 which follow. All dimensions are in mm
unless otherwise stated. The TNC adapter is cable-mounted to allow flexibility in the routing of the
antenna cable.
Figure 6: Bottom (connector) View
Figure 7: Back (mounting) View
16