User Manual
Table Of Contents
- 1.0 Product Overview
- 2.0 Standards Compliance
- 3.0 Physical Specifications
- 4.0 Electrical Interfaces
- 5.0 Instructions for the safe Installation and use of the 9522B LBT
- 6.0 Modem Commands and Configuration
- 7.0 Installation of the 9522B in place of a 9522A
Iridium Satellite LLC
9522B L-Band Transceiver Product Information Guide
2.0 Standards Compliance
The 9522B is designed to comply with the standards for Radio Emissions Compliance, Electromagnetic
Compatibility, and AC Safety in the United States, European Union and Canada.
2.1 FCC Compliance
The 9522B is certified under 47 CFR Part 25 as FCC ID:
Q639522B. It also complies with Part 15 of the
FCC Regulations. Operation is subject to the condition that this device does not cause harmful interference.
Any changes or modifications, including the use of a non-standard antenna, not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
IMPORTANT: To comply with FCC RF exposure requirements, a minimum separation of 20 cm is
required between the antenna and all persons.
2.2 CE Compliance
This product, when marked with the CE symbol, complies with the European Community Council Directive
for R&TTE, 99/5/EC, provided that the integrator/user adheres to the instructions detailed in this LBT
Interface Specification. This product is in compliance with applicable ETSI standards. Compliance with the
requirements of ETSI EN 301 489 requires the use of a shielded digital data interface cable.
5